R3 Power Series Rotary Shaver

The instruction manual for this model says dry clean only. NO water cleaning.

You would need to time the amount of time you have had it plugged in to know if it is fully charged.

Please contact us at Contactus@remingtonproducts.com or call us at 800-736-4648.

You want to do daily cleanign and weekly cleaning. DAILY: 1. Press the release button on front of shaver and open head assembly. (Diagram I) 2. Tap out excess hair shavings. (Diagram J) 3. Rinse the head of the shaver in running water. NEVER submerge the shaver in water! 4. Leave head open for drying. 5. Snap head closed before using the shaver again. (Diagram K) WEEKLY: Weekly: 1. Perform the daily cleaning steps 1 and 2. 2. Remove the cover from the hair pocket assembly. (Diagram L) Place the body of the shaver aside to ensure that it will not get wet. 3. Hold the cutter assembly so that the blue cutter is facing towards you. Slide the inner cutter carrier away from the blue cutter to release it from the assembly. (Diagram M) 4. Remove the inner cutter carrier away from the cutters. 5. Remove the cutters. (Diagram N) 6. Thoroughly rinse away any debris from inner and outer cutters. (Diagram O) 7. Replace the inner cutters. Match the hub colors of the inner & outer cutters [excluding model PR1235] (Diagram P) 8. Place the inner cutter carrier back into position and lock into place. (Diagram Q) 9. Lubricate each cutter with household oil. 10. Align the spring hinge into the slot at the back of the hair pocket and press into place. Snap the head assembly closed. (Diagram K) ** Trimmer: Lubricate teeth with oil every six months

Yes it does come with a cord.

To register you new Remington product, please use the link below, http://www.remingtonproducts.com/register-my-product.aspx

No this will only work cordless.

Yes, the inside cutters are color coded with the outer cutters because in the manufacturing process the cutters are “pair lapped”. This means the pair of cutters are run together for a number of cycles to grind or hone them into a mating pair. We color code the hubs so when the consumer cleans the shaver they can get the paired cutters back together for best performance.